Electrolux E9WHMIC1 Bedienungsanleitung Seite 3

Do not install or use a damaged product or drain
•
hoses.
Install the product in a safe and suitable place that
•
meets installation requirements.
Do not install the product above any electrical sockets,
•
or above any devices located on the wall, or
freestanding devices close by on the floor to avoid the
risk of electric shock.
Remove all the packaging.
•
Make sure the pipes are fixed properly to avoid leaks,
•
noise or damage.
Ensure proper drain hose path between the appliance
•
and the filter inlet to avoid blocking the drain flow.
Fixing devices for the wall are not included owing to
•
different wall materials. Use proper fixing devices
suitable for the walls.
Ensure that there are no visible water leaks during and
•
after the first use of the product.
Do not use high pressure water sprays and/or steam
•
to clean the product.
Always switch off and check that the machine is not
•
running before accessing or cleaning the product.
Clean the product with a moist cloth. Use only neutral
•
detergents. Do not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
Clean the cartridge regularly, once a week or when
•
the red floater indicator is clearly visible.
Do not reuse water from the filter. It may contain
•
micro-plastic particles that are unfit for human and
animal consumption.
To repair the product contact the Authorised Service
•
Centre. Use only original spare parts.
This external accessory is compatible with
•
Electrolux/AEG/Zanussi household washing
machines.
Environmental concerns
Recycle materials with the symbol
in relevant containers to recycle it.
ENGLISH
. Put the packaging
3