Hama 00123900 Bedienungsanleitung Seite 2

G Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
• This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
• This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
• USB 3.0 Card Reader
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
• Do not drop the product and do not expose it to
any major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the device or continue to operate it
if it becomes damaged.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out
of the reach of children!
2
All manuals and user guides at all-guides.com
4. System Requirements
The multi Card Reader supports the following
operating systems:
• Windows 10 / 8 / 7 / Vista / XP
• Mac OS 9.x or higher
5. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• microSD / microSDHC / microSDXC / miniSD* /
• MMC / MMCplus / RS-MMC* / MMCmobile*/
*only with adapter (not included)
6. Getting started
• Connect the USB 3.0 Card Reader to an available
• Plug your memory card into the appropriate slot
• The LED indicator light flashes during data
• It is also possible to transfer data between two
miniSDHC*
MMCmicro*
Note – Compatibility USB 2.0 and USB 1.1
• The USB 3.0 multi Card Reader is backwards
compatible to USB 2.0 and USB 1.1.
• No additional drivers are needed. The
installation runs automatically.
USB port on your computer.
of the multi Card Reader. A flashing LED indicates
a successful connection. You can now run the
data transfer between your computer and the
memory card.
transfer.
memory cards which are plugged simultaneously
into the same Card Reader (hot swapping).
Note – USB 3.0
• For running the Card Reader with USB 3.0,
your computer must have a USB 3.0 interface
and an accurate installed USB 3.0 driver.
• The installation runs automatically too.