K&H IN-6804 Gebrauchsanleitung Seite 17

Timer
The timer can be used to set cooking time for a maximum of 99 minutes (1 hour and 39 minutes)
for all cooking zones.
Select the cooking zone to be used with the timer, press the button with the
then set the desired cooking time using the
buttons of the timer function (see figure). After a few seconds, the timer begins the countdown. Once the set
time has elapsed, an acoustic signal sounds and the hob switches off automatically.
To deactivate the timer, press the "
clock symbol for at least 4 seconds.
Pause
Pause-Button:
When this button is pressed, the cooktop stops working. Press the
Button again and the cooktop begins to work again.
Please do not place hot pots or pans on the keypad! This could cause damage.
Auto switch off
The hob will automatically switch off when you did not set cooking time, forgot to switch off the hob, and did
not operate the hob at all. The relationship between the power level and default switch off time is shown in
below figure.
CONTROL PANEL WARNINGS
Residual heat indicator
The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user
when cooking zones are still hot.
If the display shows
lit, that zone can be used, for example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator – Error code "E0"
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for
your induction hob, the symbol "E0" mean "no pot" will appear in the display (see figure at side). If
no pot is detected within 180 seconds, the hob switches off.
All manuals and user guides at all-guides.com
" button to set the display showing "00" or hold the button with the
Power level
1-3
4-6
7-9
, the cooking zone is still hot. If the residual heat indicator of a given cooking zone is
/ /
The hob automatically switch off after
8 hours
4 hours
2 hours
17
clock symbol
/ / / / / /