Herunterladen Diese Seite drucken

Audio Design Hifonics EB-MIC Bedienungsanleitung Seite 2

Upgrade-kit fur eb112a

Werbung

Lieferumfang
2 x Kabelloses Funkmikrofon
1 x Mikrofontasche
1 x Upgrade-Platine
4 x Befestigungsschrauben*
4 x Plastikunterlegscheiben*
1 x Einbauanleitung
Für die Mikrofone werden ins-
gesamt 4 AA Batterien benötigt.
* jeweils 2 als Ersatz
UHF-Übertragungsbereich
823,85 / 863,3 MHz
Verwendungszweck
Dieses Upgrade-Kit dient dazu,
ein HiFonics EB112A Soundsys-
tem mit einem Empfänger für
den drahtlose Mikrofon-Betrieb
auszurüsten. Dazu muss die
Upgrade-Platine im Gehäusein-
nern des Soundsystems instal-
liert werden. Beachten Sie dazu
die folgenden Anweisungen.
HINWEIS: Mit anderen EB-
Soundsystemen von HiFonics
ist das Kit nicht kompatibel.
2
Scope of delivery
2 x wireless microphone
1 x microphone bag
1 x upgrade circuit board
4 x fastening screws*
4 x plastic washers*
1 x installation guide
A total of 4 AA batteries are
required for the microphones.
* each 2 as a spare part
UHF transmission range
823.85 / 863.3 MHz
Purpose of use
This upgrade kit is used to equip
a HiFonics EB112A sound sys-
tem with a receiver for wireless
microphone operation. To do
this, the upgrade board must
be installed inside the housing
of the sound system. To do this,
follow the instructions below.
NOTE: The kit is not compatible
with other HiFonics EB sound
systems.

Werbung

loading