Manufacturer Information - KOLINK PSU-Serie Bedienungsanleitung

click when secure). Be sure to save any unused modular cables for use in the
future.
• Connect the AC power cord to the power supply and turn it on by flicking the
switch to the ON position (marked with "I").
Congratulations! You have completed the installation of your new Kolink power
supply and your system is ready to go!
DISPOSAL
Due to European directives* you are no longer allowed to dispose of used
electrical and electronic devices as unsorted domestic waste. The devices must
be collected separately.
The trash can on wheels pictogram indicates the need to dispose of the device
separately. Please help to protect the environment and make sure, once you have
decided to stop using the device, that you dispose of it responsibly via the correct
collection system. In Germany, you are legally** required to dispose of used
devices separately, instead of as domestic waste.
Your local waste disposal authority has set up one or more collection points at
which used devices from private households in your area can be handed in free of
charge. In some cases waste disposal authorities will pick up used devices, even
from private households. Please refer to your local household waste collection
brochure, or visit your town hall or community administration office, for more
information on handing in or collecting used devices in your area.
* Complies with Directive of the European Parliament and of European Council on
waste electrical and electronic equipment (WEEE).
** Corresponds to the law on sale, return and sustainable disposal of electrical
and electronic equipment (Electrical and Electronic Equipment Act – ElektroG)

MANUFACTURER INFORMATION

Kolink products are manufactured on behalf of
Pro Gamersware GmbH
Gaussstrasse 1, 10589 Berlin, Germany
Email: support@kolink.eu
www.kolink.eu