Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INTRODUCTION
We are delighted that you have chosen to use a Kolink power supply in your PC.
Kolink power supplies are designed for complete compatibility for your desktop
PC system build or upgrade. With the features to be expected from a quality
power supply, it's a great choice for systems where continuous and reliable power
delivery and low noise are essential.
Please read and follow all the information contained in these instructions careful-
ly prior to installation. Should you have any further questions, please contact our
customer service. See contact information in item Manufacturer's details.

SAFETY INSTRUCTIONS

The power supply is only guaranteed to function properly if the instructions are
followed.
Caution: Only use original Kolink power cables. Using not Kolink power cables or
cables of older power supply unit series may lead to defects!
Connect the power supply directly with a power source. Don't use an outlet power
strip.
Never open the power supply case. There is a risk of fatal injury when working on
power sources. The electronic components inside the case generate a high
voltage that is dangerous to humans. Even after disconnecting the power supply
from a power source, some parts still have high voltages. If you notice traces of
smoke, damaged cables and exposure to liquids, immediately disconnect the
power from the power source and do not use it again.
Please have any and all necessary repairs conducted by an authorized expert!
Opening the device voids your warranty.
• Never handle the power supply with wet or damp hands when in operation.
• Never insert objects into the power supply's apertures/fans.
• Note that the power supply is designed for use indoors in conditions without
high levels of moisture in the ambient air. Using the power supply outdoors will
lead to serious damage.
• Never work on the power supply while it is connected to a power source. In this
case, always set the power switch to "0" and / or disconnect the power plug.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis