Modster SR80 PRO Betriebsanleitung Seite 39

Manual - Brushless Transmitter
Troubleshooting
Problem
The system is not
connected.
The receiver goes into
failsafe mode not
matching the distance
from the transmitter.
The receiver is not
responding during
operating.
www.modster.at
Mögliche Ursache
Your transmitter and receiver are
too close.
You are aroung metal objects.
The model is not the one that is
bound to the transmitter.
The receiver antenna is damaged,
cut or not above the vehicle/not
in an antenna tube.
Low battery voltage.
Loose or damaged wires or
connector between battery and
receiver
Lösung
Take transmitter 1 to 3 meters
away from the receiver.
Try an area with less metal.
Check the selected model. If its
not yours, rebind transmitter
and receiver.
Ensure your receiver antenna
is not damaged and above the
vehicle in an antenna tube.
Replace the receiver and
rebind to transmitter.
Charge or replace battery.
Check wires and conntections
between battery & receiver and
ensure nothing is damaged.
39