Controlling Tips; Motor Care; After Driving - Modster SR80 PRO Betriebsanleitung

Manual - SR80 Vector Pro

Controlling Tips

Keep away from watercraft, solid objects, waves or rapid currents, animals or plants in the wa-
ter. Also keep away from areas with many people such as swimming areas, fishing ponds etc.
Check regional laws or regulations before driving in a specific region.
Maximum speed can only be achieved if the water and wind conditions are correspondingly
mild. Sharp curves, wind or waves can cause the boat to tip over. Always adapt your driving
style to the driving conditions. For your first ride we recommend light to no wind and calm
water.
ATTENTION: If you drive with full throttle in turbulent water, the propeller could get over and
under water again, which can lead to damage to the propeller.
ATTENTION: Never get your boat out of the water at extreme temperatures, turbulence or
without supervision.

After Driving

1. Turn off the controller
2. Disconnect the battery
3. Turn off the transmitter
4. Remove the batteries from the boat and the transmiter.
Always store the boat with hatch removed to prevent mold etc. in the hull.

Motor Care

Extend the life of the motor by preventing overheating. Excessive wear occurs from constant
turns, starts and stops or permanent full throttle, or driving in inappropriate conditions as de-
scribed above.
Overheat protection is provided by the controller in terms of damage to the circuit, but can
not protect the motor from heavy resistance.
26 www.modster.at