Product Description - WOLFF Weldmaster 2.0 Originalbetriebsanleitung

Translation of the original operating instructions
Weldmaster 2.0
Dear Customer
You have chosen to purchase the Weldmaster 2.0
the right choice when it comes to quality and
performance.
This operating manual contains important instructions
for operating the machine.
Attention!
Please read this operating manual carefully, and
ensure that all users read this manual before
operating the machine.
Observing the safety instructions protects against
situations that may endanger health and safety
and helps to prevent improper use of the machine.
Ensure that you are confi dent operating the machine
before commencing work. During operation is too late!
Do not allow persons to operate the machine if they
do not possess the necessary expertise to do so.
Legend
Important instructions relating to safety and damage
prevention are indicated in this operating manual by
the following symbols.
Important instructions
Warning
Warning of general danger
Wear safety glasses
Wear hearing protection
Read the instructions/notices
Special waste

1.0 Product description

Important components of the machine
The numbering of the product features refers to the illust-
ration of the machine on the graphics page 2-4.
g
A
1 Drive wheel
2 Pressure roller
3 Welding nozzle
4 Guide roller
5 Wall switch-off
6 Hot air blower
7 Welding wire holder
8 Display
9 Control keys
10 Holder socket wrench
11 Carrying handle
12 Sensor
Functional description
Please refer to the graphics on pages 2-4 while you read
the operating instructions.
Restriction of use
The Welding machine is designed exclusively for welding
PVC, PUR, Polyolefi ne-, Caoutchouc and Linoleum fl oor
coverings in dry rooms. Any other or comprehensive usage
is not according the defi ned application.
Uzin Utz Tools GmbH & Co. KG is not liable for any dama-
ge or loss caused by this.
EN
13