How To Use - Lionelo Cora Bedienungsanleitung

Product description (fig. 1)
1.
Backrest adjustment lever
2.
Tray folding key
3.
Main chair folding key
4.
Seat height adjustment levers
5.
Front wheel brakes
6.
Footrest inclination adjustment
key

How to use

How to assemble the high chair
1.
Take the chair out of the box. Keep the wrapping out of reach of children (fig. 2).
2.
Insert legs in the corresponding spot on the chair frame. If you can hear
a „click", it means the assembly has been successful (fig. 3).
3.
Keep the chair with one hand, and push the frame with rear wheels with
the other hand. If you can hear a „click", it means the assembly has been
successful (fig. 4).
How to assemble and disassemble the tray
Assembly: Pull the adjustment lever (7) and then insert the tray into the chair
frame holes (fig. 5). Release the adjustment lever. Check if the tray has been fixed
securely and does not pull out.
Disassembly: Pull the adjustment lever (7) and pull the tray out.
How to adjust the product
1.
Tray: Pull the adjustment lever (7) and set the tray in one of two positions.
Make sure there are no red indicators on the frame (visible in fig. 12) - this
position is for folding the tray only.
2.
Footrest: To set the top position, lift the footrest only. If you can hear
a „click", it means the higher position has been secured properly. To lower
the footrest, slide both footrest adjustment keys (6) and set it in one of three
available positions (fig. 6).
3.
Five-point safety belts: connect shoulder belts to hip belts as showed
in the fig. 7. When combined, insert the belts into the belt buckle. If
you can hear a „click", it means the belts have been fastened properly.
To undo the belts, press the button on the buckle. Shoulder belts must be
EN
7.
Tray adjustment lever
8.
Five-point safety belts
9.
Tissue pocket
10. Rear wheels
11. Supporting leg
‑ 6 ‑