Footrest Adjustment; Cleaning And Maintenance - Lionelo Koen Bedienungsanleitung

How to fasten belts
To make sure your child is safe and does not fall from the chair, fasten safety
belts, as showed in the picture below (fig. 8).
1.
Put upper belt buckles on the side belt buckle.
2.
Insert buckles into the fastening.
3.
Make sure the belt has been fastened properly.
4.
To undo the belt, press the button in the fastening.

Footrest adjustment

You can choose 2 heights of the footrest.
1.
Remove the footrest from the product. Next loosen screws which connect
plastic connectors (J) to the wooden footrest. See fig. 9.
2.
To install in a higher position, slide plastic connectors to the center and
tighten the screws up. To install in a lower position, slide plastic connectors
to the outside and tighten the screws up. Attach the footrest on the product.
3.
Screw in the screws. Slide the footrest over the screws that support it (fig. 3a).

CLEANING AND MAINTENANCE

Keep the chair clean and take care of it to prevent your child against accidental
injuries.
1.
To clean the product, use a wet cloth. You can use a soft detergent.
2.
Regularly check if all elements have been tightened up properly and there
are no loose parts.
3.
Regularly check operation of the safety belt mechanism.
4.
If you do not use the chair, keep it in a clean and ventilated place. Avoid
direct sunlight.
5.
Never use strong detergents, polishing materials, bleaches and alcohol-rich
products.
The pictures are for reference only. The real design of the products
EN
may differ from the pictures presented.
‑ 6 ‑