Personal Safety; Device Use; Cleaning And Maintenance - physa PHY-400TH-1 Bedienungsanleitung

8
d) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
e) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
f) Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
g) Use the device in a well-ventilated space.
h) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
i) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
j) Keep packaging elements and small assembly parts
in a place not available to children.
k) Keep the device away from children and animals.
REMEMBER! When using the device, protect children
and other bystanders.

2.3. PERSONAL SAFETY

a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
c) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i) Do not move, adjust or rotate the device in the
course of work.
j) Clean the device regularly to prevent stubborn grime
from accumulating.
k) Do not cover the air intake and outlet.
l) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n) Keep the device away from sources of fire and heat
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The product is intended for heating and disinfecting
(damp) towels thanks to the built-in UVC lamp. The device
automatically controls and maintains the temperature. This
product is intended for commercial use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
PHY-400TH-1, PHY-400TH-1_BLACK
1
3
2
5
4
PHY-230TH-1, PHY-230TH-1_BLACK
1
2
4
3 5
PHY-200TH-1, PHY-200TH-1_BLACK
3 2 1
5 4
1. Control panel
• PHY-400TH-1, PHY-400TH-1_BLACK: upper
compartment left ON/ OFF, lower compartment
right ON/OFF
• PHY-230TH-1, PHY-230TH-1_BLACK: ON/OFF
• PHY-200TH-1, PHY-200TH-1_BLACK: Left
ON/OFF of the device, right ON/OFF of UV
sterilization
2. Door
3. Door handle
4. Foot
5. Condensate tray
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label. The device can only heat up damp towels placed
on the attached grid - do not heat dry towels, because in
the event of contact with the walls of the compartment,
the material may discolor. The device has a disinfection
function thanks to UV radiation. The disinfection efficiency
depends on the number and distance of the towels from
the device wall, i.e. the smaller the distance and the number
of towels, the more effective disinfection process.
WARNING: UVC radiation is harmful to the eyes and skin
- do not expose yourself to it! Concerns PHY-230TH-1 /
PHY-230TH-1_BLACK only: the device has a safety device
that automatically disconnects the activated UV lamp when
the door is opened. In models PHY-400TH-1 / PHY-
400TH-1_BLACK and PHY-200TH-1 / PHY-200TH-1_
BLACK: before opening the door turn off the UV-Lamp.
CAUTION: the inside of the device heats up to approx. 70°C.
To avoid accidental burns while working with the appliance,
use tongs or suitable gloves to pull out and remove towels.

3.3. DEVICE USE

A. When properly connected to the power source, open
the compartment door, slide out the towel rack and
place damp, rolled up towels on it.
B. Insert the rack with towels into the compartment and
close the door tightly.
C. Press the ON / OFF power button - the illuminated
button or indicator light means that the device is
working, i.e. it generates and maintains heat and
UVC radiation (in the case of PHY-400TH-1, PHY-
400TH-1_BLACK and PHY-230TH-1, PHY-230TH-1_
BLACK models) inside the compartment. In the PHY-
200TH-1 model, PHY-200TH-1_BLACK, a separate
button is used to turn on the UVC radiation (as
described above).
CAUTION: the device takes approximately 15
minutes to reach operating temperature. During this
time, do not open the door to avoid sudden heat
loss. Check the level of condensation in the tray and,
if it is full, empty it immediately.
D. Once the operating temperature is reached, the
device will automatically maintain it as long as it is
turned on.
E. To turn off the device, set all buttons on the panel to
the OFF position („O" - PHY-400TH-1, PHY-400TH-1_
BLACK and PHY-200TH-1, PHY-200TH-1_BLACK) or
pressed (PHY-230TH-1, PHY-230TH-1_BLACK). The
lights will turn off.
CAUTION: after switching off, the device remains
warm for some time - be careful, especially when
removing towels!
If the device is not used for a long time, also
disconnect the plug from the power source.

3.4. CLEANING AND MAINTENANCE

a) Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used.
b) Use only non-corrosive cleaners to clean the surface.
c) After cleaning the device, all parts should be dried
completely before using it again.
d) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
e) Do not spray the device with a water jet or submerge
it in water.
f) Do not allow water to get inside the device through
vents in the housing of the device.
g) Clean the vents with a brush and compressed air.
h) Use a soft cloth for cleaning.
i) Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
j) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with
their markings. By choosing to recycle you are making
a significant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.
9