Hama 00124022 Bedienungsanleitung Seite 2

G Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
• USB 3.0 Card Reader
• USB 3.0 Cable
• Quick guide
3. Safety Instructions
• The product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Do not drop the product and do not expose it to any
major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
• Do not open the device or continue to operate it if it
becomes damaged.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out of
the reach of children!
2
All manuals and user guides at all-guides.com
4. System Requirements
The card reader supports the following operating
systems:
• Windows 10 / 8 / 7 / Vista / XP
• Mac OS 9.x or higher
5. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• microSD / microSDHC / microSDXC
• CF Type I
6. Getting Started and Operating
• Connect the included USB 3.0 cable to the multi
• Connect the free connector of the USB cable to an
• Plug your memory card into the appropriate slot
Note – Compatibility USB 2.0
and USB 1.1
• The USB 3.0 multi card reader is backwards
compatible to USB 2.0 and USB 1.1.
• No additional drivers are needed. The
installation runs automatically.
card reader.
available USB port on your computer.
of the multi card reader. You can now run the data
transfer between your computer and the memory
card.
Warning – Data Loss
• Ensure that the data transfer is done before you
remove a memory card from your Card Reader.
• Always use the eject function of your
operating system before you remove a
memory card from your Card Reader or
disconnect your Card Reader (with inserted
memory card) from your end device.
• Data loss can´t be excluded at disregard!