Product Description - Concept ZA7030 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1 Blades
2 Power button
3 Battery status indicator
4 Replaceable attachment 4-6 mm
5 Replaceable attachment 7-9 mm
6 Replaceable attachment 10-12 mm
7 Trimming attachment
8 Replaceable attachment 16-18 mm
9 Replaceable attachment 22-24 mm
10 Replaceable attachment 28-30 mm
11 Cutting length switch (0.8-2.8 mm)
12 Power socket
1
11
46
The package also includes:
- Oil for lubrication of blades
- Comb
- Brush
- Charger
2
10
8
5
3
7
12
OPERATING INSTRUCTIONS
The appliance is designed for cutting hair and beard.
CUTTING
WARNING! Use the hair trimmer only on dry hair. Do not use on freshly washed hair!
Note: The trimmer can be operated with an AC adapter (if the battery is at least partially charged) or only on
a charged battery.
1. Position the person to be trimmed in front of you on a chair so that the top of the head is at the height of your
chest.
2. Cover the neck and shoulders of the person to be trimmed against falling hair.
3. Comb the hair.
4. Assemble the trimmer with the desired attachment. For finer cut adjustment, do not put any attachments and select
the desired cut length (0.8 / 1.5 / 2.2 / 2.8 mm) using the length switch (11). Then turn on the trimmer.
5. Cut your hair in slow, repeated movements. Always cut small parts of hair. We recommend starting with a higher
comb attachment and gradually replacing it with a lower one.
6. For best haircut results, always move the hair trimmer against the direction of hair growth.
7. For easier cutting of longer and wavy hair, you can guide the hair with a comb against the blades. Remove the cut
hair so that the cutting mechanism does not get clogged.
8. To adjust the length of the hair around the ears and back of the neck, remove the comb attachment.
9. Comb the hair ends over the ears before cutting the line around the ears. To align the hairline at the back of the
9
neck and at the neck, rotate the cutting mechanism perpendicular to the skin and create a clean hairline with a slow
downward movement.
10. Always turn off the appliance when you put it down during use.
11. After use, switch off the appliance and remove the attachment (if used).
12. If you use the appliance in the bathroom, be sure to switch it off and unplug it immediately after use, as the proximity
6
of water and the appliance's contact with water is very dangerous, even when the appliance is turned off!
When replacing the comb attachments, the appliance must be switched off!
4
ZA7030 ZA7030
EN
47