Behringer XENYX 1202 Schnellstartanleitung Seite 19

MAIN MIX – The MAIN OUT connectors are
(17)
unbalanced mono jacks. The main mix signal appears
here at a level of 0 dBu. The MAIN MIX fader adjusts
the volume of these outputs. The XENYX 802 and
502 mixing consoles feature a rotary control for
this purpose.
2-TRACK – The 2-TRACK are used to bring an
(18)
external signal source (e.g. CD player, tape deck, etc.)
into the console. They can also be used as a standard
stereo line input, so the output of a second XENYX or
Behringer ULTRALINK PRO MX882 can be connected.
2-TRACK OUTPUT – These connectors are wired
(19)
in parallel with the MAIN OUT and carry the main mix
signal (unbalanced). Connect the 2-TRACK OUTPUT to
the inputs of your recording device. The output level
is adjusted via the high-precision MAIN MIX fader or
rotary control (802/502).
2-TR TO MIX – When the 2-TR TO MIX switch is
(20)
depressed, the 2-track input is assigned to the main
mix providing an additional input for tape machines,
MIDI instruments or other signal sources that do not
require any processing.
2-TR TO CTRL ROOM – Press the 2-TR TO CTRL
(21)
ROOM/PHONES switch if you want to monitor the
2-track input via the CTRL ROOM OUT. This provides
an easy way to monitor signals coming back from
tape to ensure that they are recording correctly.
FX TO CTRL ROOM – If you want to monitor only
(22)
the FX send signal in your headphones or monitor
speaker(s), press the FX TO CTRL switch. This mutes
the main mix signal while routing the FX SEND
output to the monitor(s). The XENYX 802 and 502 do
not feature this switch.
+48 V – The red +48 V LED lights up when
(23)
phantom power is on. The PHANTOM switch
activates the phantom power supply on the XLR
connectors of all mono channels.
POWER – The POWER LED indicates that the
(24)
console is powered on.
LEVEL INDICATOR – The high-precision
(25)
4-segment display accurately displays the relevant
signal level.
19
Quick Start Guide