Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5a.
Part number codes MANOCOMB-IP65 (most common options)
codes for most common options
part number structure
a / approvals
a / approvals
b / switching function
b / switching function
b / switching function
b / switching function
b / switching function
b / switching function
b / switching function
b / switching function
c / material wetted parts
c / material wetted parts
c / material wetted parts
d / switching contact
d / switching contact
d / switching contact
d / switching contact
d / switching contact
d / switching contact
d / switching contact
d / switching contact
M 0 a b c d - e (f) - g h i
standard version (CE marking)
SIL, TÜV, PED approval
1K (1x SPDT)
1KA (1x SPDT, 1x integrated pressure gauge)
2K (2x SPDT)
2KA (2x SPDT, 1x integrated pressure gauge)
2KP (2x SPDT; seperate measuring systems)
2K2AP (2x SPDT; seperate measuring systems with 1x integrated pressure gauge each)
1KPDi (1x SPDT, differential pressure)
1K2APDi (1x SPDT, differential pressure, 1x integrated pressure gauge for each + & - pressure inlet)
brass, FKM
stainless steel 1.4571 (AISI 316Ti) / 1.4404 (AISI 316L), FKM
stainless steel 1.4571 (AISI 316Ti) / 1.4404 (AISI 316L), welded/no gasket
Standard micro switch
MG (micro switch with gold-plated contacts)
MH (for higher switch load at DC)
CS (multi purpose micro switch)
CH (for high switch load)
I-N (inductive contact, NAMUR NC)
I-SN (inductive contact, NAMUR NC, safety function)
I-S1N (inductive contact, NAMUR NO, safety function)
MANOCOMB®-IP65 Operating Instructions
0
1
0
1
2
3
4
5
7
8
1
2
G
A
B
C
H
G
J
K
W
Werbung
