Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Usage instructions
Observe the safety instructions!
1
Prepare the lawn
Ensure that there arenotobjects (pinecones, branches,
rocks, etc.)thatmaydamagethe robot orbeejected
by it. During the first mowing process, always set the
cutting height to MAX in order to avoid damage to the
limitationcable!Cut the lawn to4cm atmost during
first mowing.
2
3
Programme automatic start
or:
Manual start
Emergency deactivation: Push the STOP button
at onceand turn off the robotin case ofdangers,
accidents or if the appliance vibrates strongly.
Therobotreturnstothechargingstationonitsownfor
charging. Automatic resumption of mowing.
Rain sensor - Robot returns to the charging
station if it rains. Next start in the 48-hours
interval.
Robot stops automatically at inclinations of > 20°!
Collision sensor! Robot moves around
obstacles.
Danger of injury! Never reach into running
knives.
| 10 |
Set the cutting
height (2 - 6 cm)
Recommendation: Do not
set the cutting height too
short intry weather inorder to
avoid drying out of the lawn!
Programme automatic start
After activation, the individual digits of the safety code
must be entered! First connect the mains. Completely
charge the robot before initial commissioning!
Activate
Reduce
Enter the safety
code
Initial password: 0000.
Set and confirm individu-
al digits with arrows.
Set area
2
(50 - 1000 m
)
(50 - 1500m )
Determine
starting time
Setting time
Push the start button
Robot starts mowing. Then will the programmed starting
time in the 48-hour-interval be activated!
User Manual
Confirm input
Increase value
value
Werbung
Inhaltsverzeichnis
