Franke FGC 915 I XS LED Bedienungsanleitung Und Installation Seite 11

Air outlet – Recirculation Version
• Insert the Connector extensions 14.1 into the side of the
Connector 15.
• Insert the Connector 15 into the Support bracket 7.3 and fix
it with the screws.
• Fasten the Support bracket 7.3, fixing it to the upper part
with the Screws.
• Make sure that the Connector extensions outlet 14.1 is in
correspondence with the Chimney openings both horizon-
tally and vertically.
• Join the Connector 15 to the Hood canopy outlet using a
rigid or flexible pipe ø¸150 mm, selection of which is at the
discretion of the installation technician.
• Make sure that the Activated charcoal odour filter has been
fitted.
Application of Novastick Tape
• Apply the Novastick tape 16 to the front edge of the Upper
Chimney from the top part down to the start of the Lower
Chimney.
EN
12c
7.3
14.1
15
7.3
12e
1
11