PROBLEM
The fan works, but the fog
function does not work
The lights on the device do
not light up and the device
does not work.
The device has a strange
smell.
The fan is not working
properly.
TROUBLE SHOOTING
POSSIBLE CAUSE
The water tank could be
damaged.
The watertank is empty.
The water in the watertank
could be dirty.
The mist plate is blocked.
Power failure.
The device is not connected
to the power supply.
If the device is used fort he
first time, any residue from
the production may be in the
water tank.
The water in the watertank
could be dirty.
The power cord is damaged.
The assambly was not made
properly.
Seite 19 von 21
SOLUTION
Remove the water tank and
inspect it for damage.
Fill the watertank – a full water
tank lasts up to 8 hours.
Clean the watertank and fill it
with fresh water.
Release the mist plate.
Wait for the power to recover.
Connect the device to the
power supply.
Rinse the water tank before first
use.
The
smell
disappear after several uses.
Clean the water tank and fill it
with fresh water.
Contact the manufacturer or his
customer service for service or
cable replacement.
Dismount
the
reassemble it according to the
instructions.
should
fan
and