Description Of The Control Panel; Setting The Functions - She She40St2001Smf Bedienungsanleitung

1. Place the device on a flat and dry surface (no use in wet rooms).
2. Plug the connector into a standard 220 ~ 240V outlet.

Description of the control panel

Setting the functions

ON/OFF and Setting the Speed
Please push the buttons to start the fan and set the speed levels:
 High Speedlevel
 Middle Speedlevel
 Low Speedlevel
 OFF
Timer-Function
This function allows you to turn off the fan timer. Turn the timer knob to the desired time.
Oscillation
By pushing down the oscillation pin, the fan head
moves from right to left and back again. This allows
you to achieve a horizontal air distribution in the
room.
To stop the function, pull the pin back up.
Mist
To start this function turn the knob.
Always disconnect the device from the power supply with dry hands if you want to fill the
Only fill the tank with clean water that has a lower temperature than 40 ° C.
You must not add any chemicals, fragrance oils, other fragrances or other liquids to the
water as these could clog the nuisance gland and attack the plastic!
START UP
NOTE
water tank.
Seite 17 von 21