Massoth eMotion 8FS Handbuch Seite 29

Attachment 2: Command allocation A
Value Application
0 = Switch function with light key,
0 - 28
1 ... 28 = Switch function with F-key No. 1-28
30 Permanent-OFF (no function assigned)
31 Permanent-ON (except service mode)
129 -255 Extended function commands (binary state)
Anhang 3: CV 112, 122, 132, 142, 172, 182 – Dimming values + Servo function
Value Application
1-100 percentage voltage at the output
120 standard servo function
121 standard servo function with end position switch off
122 precision servo function
123 precision servo function with end position switch off only A1(CV112) / A2(CV122)
124 standard servo with speed step operation
standard servo with speed step
125
and end position switch off
248 inverted standard servo function
inverted standard servo function
249
with end position switch off
250 inverted precision servo
252 inverted standard servo with speed step operation
inverted standard servo with speed step
253
and end position switch off
Attachment 4: CV 113, 123, 133, 143, 153, 163, 173, 183 – Condition
Value Application
0 permanent activation (standard switch-on function)
1 forward only
2 backward only
4 standing only
Note
129 ≙ 1 / 255 ≙ 127
Note
100 = no dimming
only A1(CV112) / A2(CV122)
only A3(CV132) / A4(CV143)
only A3(CV132) / A4(CV143)
only A1(CV112) / A2(CV122)
only A3(CV132) / A4(CV143)
only A3(CV132) / A4(CV143)
Note
29