Eldom EK5055 Bedienungsanleitung Seite 9

2. "TARE" function
When total sum of all loads on scale > 4% of scale's max weight capacity. (4% = 200g when
capacity is 5 kg). LCD will show "_ _ _" lub "0g" each time [Z/T] button is pressed. "_ _ _"
means not stable, please wait for a moment. "0g" and meanwhile an icon "TARE" on lower
left corner of LCD mean "TARE" function is active. Max weight capacity is reduced by total
weight of all loads. By pressing [Z/T] you can see the total weight of all loads on the scale.
If you want to weight more loads, just press [Z/T] to reset LCD reading to „0" again.
AUTO SHUT OFF
Auto shut-off occurs if display shows '0' or shows the same
weight reading for 2 minutes.
WARNING INDICATORS
1. Replace new battery
2. Scale overload. Remove item to avoid damage.
CLEANING
1. DO NOT immerse the scale in water.
2. Clean with soft moist cloth without detergents, wipe dry
ENVIRONMENTAL PROTECTION
- the appliance is made of materials which can be recycled,
- it should be handed over to the applicable collection point for the recycling of electrical
and electronic equipment
WARRANTY
- this appliance is designed for domestic use only,
- it cannot be used for professional purposes or for other than the intended use,
- improper use will nullify the guarantee.
EN|9