Wellis Cherokee Silver Quintet Aufbauanleitung Seite 16

EN
Figure 1
How to connect a gas bottle
a) Turn the orange cap so that the arrow is pointing to the gap in the
shroud.
b) Remove the orange safety cap by pulling the lanyard out, then out.
Do not use tools. Leave the cap hanging.
c) Check that the black sealing washer is fitted inside the cylinder
valve. Connect the regulator to the valve.
d) Turn the switch clockwise on gas bottle-then turn on the gas grill as
instructed.
Gas Connector
Illustration for the connection of
BBQ and Hose
Figure 2
Warning: Always test gas line for leaks at connector with soap water
finishing all connections.
How to disconnect a gas bottle
a) Except for twin-cylinder installations with a changeover valve, turn
off the gas tap if fitted to the appliance. Wait until the burner and pilot
light have gone out. For installations with a changeover valve, it is only
necessary to switch off the empty cylinder.
b) Replace the orange safety cap onto the empty cylinder.
Hose
Gas Cylinder Regulator
Illustration for the connection of Gas
Cylinder, Regulator and Hose
Hose