Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Options in the "Configuration" menu item:
SSID:
Name for the wireless LAN with up to 32 characters. It must be the same for each
device using the network.
Wireless Mode:
Infrastructure if used with an access point or router with wireless LAN function.
Ad-hoc if no access point or router with wireless LAN is used.
Ad-hoc Band:
Speed standard can be selected in ad-hoc mode 11B/11G/11G Turbo
Channel:
Channel set for your WLAN network. The setting must be the same for the entire
network!
Leave standard setting "Auto"
Leave standard setting "Auto"
Power Mode:
Leave "Continuous Access Mode" standard setting
Preamble:
Leave "Short & Long Preamble" standard setting
Apply:
Apply changes
Cancel:
Cancel changes
Extended Range
We recommend the extended range setting.
In contrast to other IEEE 802. 11g products, extended range stands for an increased
range. Extended range operation establishes wireless data connections over larger
distances or in areas, in which radio signals are strongly absorbed.
Options in the "Advanced" menu item:
Encryption:
Enable: This activates encryption. We strongly recommend that you activate this option to
prevent unauthorised persons accessing your computer.
Auth. Mode:
Please set to "Auto".
Network Keys: You can select either "64 bits" or "128 bits" encryption strength here. We recommend that you
use the 128 bit setting.
Default Key:
In general, this should be left on the "1" setting
Key Format:
We recommend the "HEX" setting. The description below refers to this setting.
Enter your key in one of the 4 fields at the bottom.
Settings must be identical for each device in the network. Please make the corresponding settings before
you enter the key. If possible use a 128 bit (26 hex characters 0-9, A-F and a-f) key or 64 bit (10 hex charac-
ters 0-9, A-F and a-f) key for configuration.
Examples:
128 bit key "645645645ed354a354caef45ae"
64 bit key "da64650c4f".
Click "APPLY" to apply the settings. Click "Cancel" to cancel the changes.
Options in the "Site Survey" menu item:
Networks in range are listed in this menu item. Click "Refresh" to scan again. To connect the card to a wire-
less LAN, double click the network in question or select it and click "Connect".
Options in the "About" menu item:
Allows you to view the version of the driver, firmware and utilities.
Note:
This card may only be used in Germany, Austria, Switzerland, France, England, Belgium, Spain, Holland,
Denmark, Hungary, Poland, Sweden, Portugal, Luxemburg, Ireland, Greece and Finland!
See www.hama.de for the declaration of conformity with R&TTE Directive 99/5/EC.
0560
!
e
Werbung
