Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING
Install the product as described in the safety information paragraph. Turn the knob (3) to the desired position.
At this point the heater starts running and the working lamp (1) lights up.
ADJUSTING THE TEMPERATURE
Operate the unit by using the temperature control knob (3) set to high (2) until it reaches the desired
temperature in the room. Turn the knob (4) counterclockwise until you turn off the product, then it will turn
on periodically to maintain this temperature.
OSCILLATION
If you want to activate the oscillating movement, press swing button (4) on the back of appliance.
SAFETY DEVICE AGAINST OVERHEATING
If you cover the appliance or there is a malfunction, the unit may overheat. A safety device will shut down the
unit to prevent overheating. Remove anything blocking the ventilation slots and wait for the complete cooling
of the item before operating.
CLEANING
Unplug the unit from the electrical outlet and let it cool down before starting any cleaning operation.
Do not immerse in water. In any case prevent splashes of water or other liquids reaching the appliance.
Regularly clean the ventilation slot located on the back of the product and the air outlet grid (5) to prevent dirt
from obstructing the airflow. Do not clean with sponges or abrasive detergents.
TECHNICAL FEATURES
•
Power supply: AC 230V
•
Ceramic heating element
•
Oscillating movement of the base
•
Safety switch-off in case of accidental overturn.
•
Safety switch-off in case of overheating
~
50Hz - 2000W power.
12
Werbung
Inhaltsverzeichnis
