Add Device - Mova L600 Benutzerhandbuch

Connecting with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app. * Use the Mi Home/Xiaomi Home app to control your device and to interact with
other smart home devices.
1. Download the Mi Home/Xiaomi Home App
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app has been installed
already. Alternatively, search "Mi Home/Xiaomi Home" in the app
store to download and install it.
2. Add Device
Open the Mi Home/Xiaomi Home app, and tap "
right. Then tap " " in the top right corner, scan the QR code, add
"MOVA L600 Robot Vacuum and Mop Cleaner'', and follow the
prompts to finish the connection.
xxxxxxx' home
No home environment info
Devices Rooms
Note:
• Only 2.4GHz Wi-Fi is supported.
• The version of the app might have been updated, please follow the
instructions based on the current app version.
" in the upper
Scanning for devices nearby...
What should I do if I cannot scan for
devices?
3. Reset Wi-Fi
Simultaneously press and hold the buttons
hear a voice say, "Waiting for the network configuration."
Once the Wi-Fi indicator is blinking slowly, the Wi-Fi has been
successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi
and add the device again.
and until you
Wi-Fi Indicator
• Blinking slowly: To be
connected
• Blinking quickly:
Connecting
• On: Wi-Fi connected
EN
9