Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Bluetooth Pairing

Once charged, open the charging case.
Both earphones will automatically power on and connect to each other for stereo audio playback.
After approximately 2 seconds, one earphone will blink white. This means connection has been successful with the
other earphone and entered Pairing Mode.
Remove the earphones from the charging case and turn on Bluetooth on your source device.
In your device Bluetooth settings, select LTS-50. The LTS-50 will beep, indicating successful connection.
If required enter the password "0000" to finalise connection with your device.
Once paired, the LTS-50 will automatically connect with this source device for future use.
For manually powering on the LTS-50, if they have gone into standby mode, press and hold the Multi-function
Button until the white LED appears, and a beep indicates successful connection.
Single Earphone Connection
The LTS-50 can also provide mono playback from a single earphone when required.
Remove the earphone which is not required and place back into the charging case.
Once the charging case is closed, the remaining earphone will continue playback.
To revert to stereo playback, simply remove from the earphone from the charging case and it will automatically
power on and pair with the other earphone and the device.
Powering Off The LTS-50
Once the LTS-50 are placed into the charging case and the case is closed, the earphones will automatically
disconnect and turn off.
Manual Power Off
If the LTS-50 are connected for stereo playback, pause audio playback, press and hold both earphones for around
5 seconds at the same time and they will power off.
If the LTS-50 are already disconnected from the source device, press and hold either earphone and both earphones
will power off.
Please note: The LTS-50 cannot be manually powered off during a call or during playback. End the call or pause
playback to turn off the LTS-50.
During single earphone use, pressing and holding the earphone in use will power off the earphone.
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis