Focal CLEAR MG PROFESSIONAL Benutzerhandbuch Seite 7

CLEAR MG PROFESSIONAL
User manual
Please validate your
Focal-JMlab warranty,
it is now possible to register
your product online:
www.focal.com/warranty
Package contents
• 1 x Clear MG Professional headphones
• 1 x carrying case
• 1 x 4ft OFC 24 AWG cable with asymmetrical 1/8" TRS Jack
connector
• 1 x Jack adapter, 1/8" female – 1/4" male
• 1 x coiled 16.5ft OFC 24 AWG cable with unbalanced
1/4" TRS jack connector
• 2 x replacement ear cushions
• 1 x user manual
• 1 x brand content
Connecting the headphones
Each extremity of the cables has an indicator: "L" for left and
"R" for right (fig. 1). Make sure you connect each end of the
cable to the correct headphone inputs which are also labelled
"L" and "R" on the underside of the ear-pieces next to the
connectors (fig. 2). Once connected to the headphones,
connect the 1/4» Jack to your mixing console or your audio
interface.
Storage
You can store your headphones in the carrying case. You
simply have to disconnect the cable and store it in the case in
the intended compartment (fig. 3).
Care and maintenance
It is advisable to clean your headphones regularly to limit
wear and tear. To do so, we recommend using a clean, dry
lint-free cloth. After much use, wear marks may be visible on
the ear cushions. In this case, if you wish to, the ear cushions
can be replaced. Ask your local Focal retailer for replacement
parts. The ear cushions are easy to unclip by pulling them, and
to clip back into place by pushing them back onto the ear-
pieces, making sure the 5 pins are correctly in place (fig. 4).
Conditions of warranty
All Focal products are covered by warranty drawn up by the
official Focal distributor in your country. Your distributor can
provide all details concerning the conditions of warranty.
Warranty cover extends at least to that granted by the legal
warranty in force in the country where the original purchase
invoice was issued.