Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
The security device does
not work
A noise originates pipe of
steam but the produced
steam is weak
Spray head is leaked
Hooking connection of
steam pipe is leaked
Water spilled out water
tank
Steam is weak
Water tank is in distortion
No steam but the indicator
is lighted
hours. The process for clean the scale is as below:
• Remove the water tank, wash the scale at water base
with clean water.
• Open the water tank base knob, dump mixture in the
water tank, wash with clean water.
• After clean the scale, if you think there is still scale,
please repeat the above process.
Trouble shooting
Cause
One of the circuits has
fault, the plug is loose,
the fuse burned, the
LED of supply source is
extinguished
The pipe is twisted
below level to iron
The head is broken, or
the ironing is vertical
The cushion can be
damaged itself with
the aging, the junction
interface loosen itself
Water tank is broken or
has a hole
The power source is
lower or deposits can
obstruct the arrival pipe
Over heated water is
put. Or other chemical
element is put
The steam creator is
broken.
The internal electric
component is broken
Proper disposal of the devices
This EC symbol means that these goods may not be
disposed as a household waste. Obsolete devices feature
valuable materials that may be reused. They shall be
furnished for reprocessing to avoid hazardous impact
on the environment and health through uncontrolled
disposal of wastes.
Zauber PRO-270 © ZAU Grupp 2011 (ENG)
Solution
Check and maintain by
specialized technician
Raise the steam pipe
(residual water in top
returns into the device)
Replace the spray head.
Move from top down to
operate
Replace the cushion. Rotate
the junction of steam pipe
tightly
Replace the water tank
Add a stabilizer of power
source. Use a cleaning
respecting the environment
Continue to use.
Replace the water tank
Call a specialized technician
to do an examination
Page 14 of 32
Werbung
