Herunterladen Diese Seite drucken

Zauber PRO-270 i-Fördel Bedienungsanleitung Seite 11

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety devices function
This product adopts the two security protection device,
users safer and more confident
Thermostats: in fever, the thermostat control the
fever in the minimum temperature between work and
effectively prevent the high risks caused by
Hot melt implement when a thermostat which causes
fever, the temperature rose to a temperature, thermal
melt implement will be timely melt in time, to cut off
the automatic protection to prevent danger.
Installation before use
• Pleas read the instruction carefully.
• Remove all the package.
• Do not power on or open before finish the install.
• Appliance knock down assembly picture, Fig. 1
• Put the telescopic pole insert the base. Fig. 2
• Make sure the knob tight after insert the body. Fig. 3.
• Pull the little telescopic pole, knob 90 degree, telescopic
open. Fig.4.
• Open the telescopic buckle, pull the Aluminum pole.
Fig . 5.
• Keep the buckle tight. Fig.6
• Put the steam brush on the brush fix base.Fig.7
Water tank with water
• Will hang on a machine on the flat ground and took
out the army opened the cover, fasten the lid with
clockwise. as in fig. 8
• To the case with water, water from the army covered
with water. (as in figure 9 if you water it is very high
degrees of hardness of water resources management
consult, if possible please use the following of the
mixed distillation water or soften: 50% of the water
with fountain 50% distillation water or soften or drink
water is pure water.
• It up with water after the army, with a clean towel to
clean the toilet outside the water tank on the well-being
of will. (in figs 10 and 11)
• Do not fill hot water.
Iron instruction
• Fill the water from the water filled cover, open the cover
of water tank, fill the water into water tank. Fig. 12,
Page 11 of 32
Zauber PRO-270 © ZAU Grupp 2011 (ENG)
1
2
3

Werbung

loading

Verwandte Produkte für Zauber PRO-270 i-Fördel