Height Adjustment - Walimex Pro AIR 380 Deluxe Bedienungsanleitung

EN
By purchasing this product you have acquired a high-quality,
versatile and practice-oriented lamp stand / studio stand with
long-term quality. The Walimex pro AIR 380 Deluxe offers a high level
of comfort and additional safety thanks to its air-damped elements,
which enable slow and gentle lowering even under load. The lamp stand
has good stability in its stand class and offers enough reserves for your
equipment with its high load capacity and its great working height.
We hope you enjoy using our product.
Your team from WALSER
Adjusting the light stand
Loosen the locking screw of the leg angle adjustment (6). Pull the stand
legs (10) outwards and press the stand star (7) downwards. This spreads
the legs. Set the desired angle of the legs. Fix the legs by tightening the
locking screws of the light stand angle adjustment (6) again. Note that the
base of the telescopic center column (12) should not touch the ground
as this will affect the stability of the stand. Proceed in reverse order when
folding the stand.
WARNING!
Risk of squeezing fingers with the struts of the stand legs (9).

Height adjustment

The light stand is equipped with a telescopic center column that can be
extended.
The locking clamps of the center column (4) are fixed by the locking
fastener screws (5). To adjust the height of the light stand, loosen the
locking fastener screws (5). Set the desired height and tighten the locking
fastener screws (5) again. Press the center column elements down to check
that all locks are fixed correctly. The stand is now ready to use.
Installation of equipment on the light stand
Using the adapter on the top, you can attach devices such as studio flashes,
LED lights, softboxes, poles etc. to this stand. Either attach the adapter
to your equipment first and then mount it on the tripod, or attach the
adapter to the tripod first and then mount your equipment on it. In both
cases, make sure that the adapter as well as the equipment are positioned
correctly and that the screws are tightened. The locking screw (2) must be
tightened so that it holds the thinner part of the inserted adapter pin, see
fig. A. This prevents accidental release of the mounted equipment. On
the upper end of the mounting adapter (1) a 1/4 or 3/8 inch thread can be
used. You can also attach suitable equipment here. The adapter can be
mounted horizontally as well as vertically on the top of the tripod.
Recommended accessories for increased stability
When using heavy equipment with large extension height, we recommend
additional accessories for stabilization. For this we recommend the use
of special sandbags or weights. The use of safety lines or ropes is also
recommended for extreme working heights. These measures guarantee
the optimum stability of your tripod even under adverse conditions.
You will find suitable accessory articles in our webshop www.foto-walser.de:
8
Art.-No. / Name
• 15537 Walimex pro sand bag
• 15876 Walimex stand weight 3 kg
• 13739 Walimex weight for rods and boom stands 4,4 kg
• 12720 Walimex pro Tripod Wheels Pro, set of 3
• 21636 Walimex pro Tiltable Umbrella Mount with Spigot Socket
Usage notes and maintenance of the light stand
• Note that light stands generally must be placed on a sufficiently strong,
level surface to ensure maximum stability and to allow the maximum
load capacity.
• Note the maximum load capacity of your light stand model (see
technical data).
• Note the max. load values specified for centrally placed equipment on
the stand.
• Regular removal of sand, dust and other contaminants is recommended.
If you notice a scratching or crunching sound when moving the center
column segments, remove the impurities with a soft, damp cloth.
• Hold the center column segment tightly with one hand during the
release of the locks before you loosen its adjustment clamp.
• Do not move a stand with mounted equipment and extended center
column. There is a strong leverage effect with a combination of heavy
equipment and a large center column extension.
Technical specifications
Walimex pro AIR 380 Deluxe
Item No.
Type
Max. working height
Min. working height
Min. packing size
Max. load capacity
Weight
No. Segments center
column
No. Segments center
column extendable
Type stand locks
Ø Center column tube
segments (mm)
Ø Max. footprint
Connection adapter
Materials
Stand tubes
Stand locking clamps
Scope of delivery
1 x Walimex pro AIR 380 Deluxe lamp stand
1 x Mounting adapter
1 x Manual D / EN
19670
Light Stand
380 cm
123 cm
120 cm
15 kg
2,7 kg
4
3
Wing Screw
40, 35, 30, 25
105 cm
5/8 Zoll Spigot, 3/8 inch thread,
1/4 Zoll thread
Aluminium
Aluminium
9