Stand Installation - Newskill ICARUS IC27F6-V2P Bedienungsanleitung

3. Stand Installation

Keep the foam underneath the monitor before attaching the stand.
Open the package and take out the stand stem and the
1
stand base mount them with a screw.
16
ICARUS SERIES
Open the pacakge and take out the product with the foam still attached. Carefully
3
place it on a desk or table and shield the screen.
Let the stand snap into the back of the monitor
If you need to take off the stand, you can pull up the quick-release
4
button on the back cover.
Take out the back cover and use two screws to mount it
2
to the stand.