Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INTRODUCTION
Thank you for deciding to purchase the Round Shower Stool from Aidapt. The Round Shower
Stool is manufactured from the finest materials available. When used correctly it is designed
to give many years of reliable, trouble-free service.
Please examine your product for any visible damage before using/installing. If you see any
damage or suspect a fault, please do not use, but contact your supplier.
N.B. This equipment must be installed by a competent person and a risk assessment
may be needed as to the suitability of the stool for the particular user.
Weight Limit: 120 kg (18.9 st.)
NB. Do not exceed the weight limit stated – doing so could put the user at risk.
INTENDED USE
This item is a height adjustable, lightweight shower seat, designed to provide extra comfort
in the shower, for occasional use.
NB: Not suitable for use as a step, for use only by competent adults.
CLEANING
All of the product components are manufactured from quality materials. However, it is very
important that you only clean your shower chairs and stools using a non-abrasive cleaner or
mild detergent with a soft cloth avoid using lime scale remover. Abrasive cleaners e.g. AJAX
and or abrasive cleaning pads will seriously damage your product beyond repair.
o
Do not exceed 50
damage the plastic.
N.B. Regular daily cleaning will reduce the build up of limescale on your product.
UNDER NO CIRCUMSTANCES use any abrasive cleaners or materials on any of the
components. Also check that the cleaner you intend to use is suitable for ABS, Vinyl, Polymer
Plastics and Thermo plastic rubbers and Polyurethane Rubber.
ASSEMBLY/HEIGHT ADJUSTMENT
1.
Take all parts out of packaging and check before assembly (see Fig. 1).
2.
Assemble legs as show in Fig. 2.
3.
Make sure that each leg is locked into position.
4.
To adjust the height of the seat, press the spring plunger on the leg and slide the
leg out to the desired eight making sure that the spring plunger relocates in one of
the holes. This process must be carried out on all four legs and they must be at the
same setting for safety.
NB. Never install the extension legs unevenly or slanting, this will compromise the
safety of the user.
Fixing and Maintenance Instructions
C when cleaning the seat cover and/or back as this will permanently
2
Ver. 3 04/2013 (2243)
Werbung
Inhaltsverzeichnis
