Casselin CGP2HRBLPT Handbuch Seite 16

Do not install this device near open fires or other heating appliances.
EN
The electric cable must be protected at least 16 Amps. The device must be plugged directly into a wall
outlet. Using a power strip will crack up the device.
Heated to the apparatus for 10 minutes until it all smoke and odor are gone off and disconnect, then use
warm soapy water for cleaning cast iron plates.
NEVER use cold water on the iron plates as this may cause thermal shock.
USE
Connecting the appliance, once the triggered switch, the switch-on indicator lights.
Turn the temperature control knob to your liking.
The temperature may be between 60 ° and 300 ° C.
We recommend using this device at a maximum temperature of 250 ° C.
When the selected temperature is set, the temperature red LED lights up.
In 10 minutes, the temperature of 250 ° C is reached and the red light for making temperature goes out.
When the temperature drops, the appliance starts to heat up and the red LED light up again. With the
operating handle, lift the top plate and grease the plates at your convenience to place your preparations to
heat or grill.
Close the plates and monitor cooking.
NOTE
The device has a security system in case of overheating. Upon activation, disconnect the device and allow it
to cool. If this protection system will start regularly, it is imperative to contact your dealer.
After automatic shutdown, the unit may be commissioned only by pressing the reset button on the unit's back
for this, wait until the temperature drops, press the Reset button.