Ayce PDS 5500 Gebrauchsanweisung Seite 54

CAUTION!
• Make sure that the appliance being connected is in good working order, if it begins to
act abnormally or stops suddenly, disconnect it from the generator.
• Make sure the appliance does not exceed the maximum rated load for the generator.
• Any device with contains an inductive load e.g. devices that contain a motor may require
more current on startup.
5. Shutting Down the Generator
- Disconnect all appliances connected to the generator.
- Set the starter key(31) to position "
- Close the petrol cock(24)
6. Overload cut-out for AC socket outlet
IMPORTANT ! The generator is fitted with an overload cut- out.
This shuts down the 230V~ socket-outlets (7) or 400V~ socket-outlets(28). You can restart
the 230V~ socket- outlets (7) or 400V~ socket-outlets(28) by pressing the overload cut-out (6).
IMPORTANT ! If this happens, reduce the electric power you are taking from the generator
or remove any defective connected appliances.
7. Overload cut-out for DC socket outlet
IMPORTANT ! The generator is fitted with an overload cut- out for DC socket outlet.
This shuts down the 12V d.c outlet (10). You can restart the 12V d.c outlet (10) by pressing
the DC overload cut-out (29).
IMPORTANT ! If this happens, reduce the electric power you are taking from the generator
or remove any defective connected appliances.
IMPORTANT ! Protection against electrical shock depends on circuit breakers (overload cut-
outs) specially matched to the generating set. If the circuit breakers require replacement,
they should be replaced with a circuit breaker having identical ratings and performances
characteristics. If repairs are necessary, please contact your customer service center.
MAINTENANCE
• Good maintenance is essential for safe, economical and trouble-free operation. It will
also help reduce air pollution.
• The purpose of the maintenance and adjustment schedule is to keep the machine in the
best operating condition.
• Turn off the engine before performing any maintenance. The exhaust contains poisonous
carbon monoxide gas. Please always select recommended accessories.
The accessories which have not equivalent quality may damage the machine.
• Please never use non-approved components and never remove the safety devices.
".
CAUTION!
• Always stop the engine before servicing, and disconnect all appliances to avoid
receiving an electrical shock.
• Periodic checks and maintenance are very important for keeping the generator
in good condition
Item Daily 20 Hrs
check or first
month
Machine oil check Check
Replace engine oil Replace
Air filter check Check
Air filter wash
Spark plug
Valve clearance
Cylinder cover wash
Fuel tank wash Wash if necessary, replace every 3 years
Check the level of Before using the generator
battery electrolyte
1. Changing the Spark Plug (Fig.13)
CAUTION: Allow the engine to cool before removing the spark plug. Before any
maintenance work always switch off the engine and disconnect from mains
power.
- Check the spark plug (item 27) for dirt and grime after 20 hours of operation and if
necessary clean with a copper wire brush. Thereafter service the spark plug after every
50 hours of operation.
- Pull off the spark plug boot with a twist.
- Remove the spark plug with the supplied spark plug wrench set (14).
- Assemble in reverse order.
103 | 104
50 Hrs 100 Hrs 300 Hrs
or every or every or every
3 months 6 months 1 year
Replace
Clean
Clean
Check/
adjust
Clean
GB