Functional Descriptions - Hifonics hfc1200 Bedienungsanleitung

FUNCTIONAL DESCRIPTIONS

Digital Voltmeter
This display indicates the actual operating voltage and is one of the most
important features to display the status of the car's power supply.
The voltmeter is working only when a 12 Volt connection on the remote terminal
is connected and a voltage of 5 ~ 10 Volts is connected to the power terminals.
Autoremote
The powercap is equipped with an autoremote function. If the powercap detects
any fluctation of the connected voltage, it turns automatically on. The powercap
turns off after approx. 60 seconds, when no fluctation or activity is detected.
Audio Warning
If a interchange of the poles is occured, an audio warning is hearable.
In this case all disconnect all connections directly. Danger of Explosion!
Potentiometer
This controller allows to adjust the voltmeter.
Attend the information on Page 15.
"+" Battery "–" Ground
Potentiometer
terminal terminal
Digital Voltmeter
14