Eco Function; Digital 12H Timer - Fakir HT 700 Bedienungsanleitung

Temperature control /
heating stations

ECO function

Digital 12 h timer
Operating
The appliance starts now to heating up the room.
If the ambient temperature rerached the desired tem-
perature the heating and fan switch off.
If the ambient temperature is fallen below the desired
temperature the appliance is heating aggain.
The ambient temperature is displayd the whole time.
This function is available in Heating I and II. To
activate this function press the ECO button
The ECO icon [12] will be displayed.
The ECO function will compare the target tempera-
ture, with the current ambient temperature, and it will
automatically select the most appropriate heating level
to guarantee an optimum comfort level while reducing
the energy consumption.
While the ECO function is ON, the appliance may
switch automatically to a lower or higher heating level,
even several time. The corresponding heating level is
alwaysshown on the display.
This function can be activated from any operating
mode (normal operating mode or ECO mode).
Auto-off:
With the appliance ON, press the menu button [4]
once. The hour indicator [9] is displayed and the tem-
perature display flashing "00".
To set the timer, use the adjustment buttons PLUS [6]
and MINUS [6] (01 - 02 - 03 -... - 12 h). The time is
shown for some second. After 5 sek. the timer display
switches to the actually ambiente temperatur.
The appliance continous heating. When the
programmed time is reached, the appliance goes OFF
automatically and the stand-by indicator [8] is dis-
played.
[7].
15