Operating; Switching On / Off; Temperature Control / Heating Stations - Fakir HT 700 Bedienungsanleitung

Switching on / off

Temperature control /
heating stations
14

Operating

1. Plug into the mains socket.
2. Turn on the main switch [H] in position „I".
3. The appliance emits a beep The Power indicator
[8] comes on and remains visible while the appli-
ance is powered.
4. If the Power indicator is not displayed, be sure
that the appliance is on a horizontal surface.
5. Press the ON/OFF button [1]
ance ON. It begins heating the room according to
the last used settings.
6. Press the heating Button [4]
one of the following heating stations:
Heating I
Heating II
7. To distribute the air flow over a wider surface,
press the swing [3]
starts swinging to the right and left. To stop the
appliance in the desired position, simply press the
swing [3]
8. To turn the appliance off, press the ON/OFF but-
ton [1] . The display may visualize a countdown
for about 10 seconds. (cool down) and the
stand-by indicator [8] is displayed.
1. The desired temperature can be selected by
pressing the menu button [4]
°C indicator [10] is displayed and the temperature
display is flashing.
2. By pressing the buttons PLUS [5] and MINUS [6]
you can adjust the tempertute between 5 and 35
°C. The blinking target temperature is shown for
some second. After 5 sek. the tamperature display
switches to the actually ambiente temperatur.
3. Press the heating Button [2]
one of the following heating stations:
Heating I
Heating II
=
=
button. The appliance
button again.
=
=
to turn the appli-
button to select
two times. The
button to select