Numeric Keypad; Using The Touchscreen - Motorola ML910 Kurzanleitung

Term
Scroll The scroll button located between the two buttons
under the touchpad can be used to move vertically in a
convenient way. Press the upper part of the scroll
button to move up and the lower part of the scroll button
to move down.
–or–
To move vertically, place your finger on the right edge
of the pad and slide your finger up and down along the
edge. To move horizontally, place your finger on the
bottom edge of the pad and slide your finger left and
right.
NOTE:
1. By default, the touchpad is enabled. Use the Fn+F2 hot keys
to enable/disable this function. The touchpad indicator found
on the keyboard panel glows red when it is disabled.
2. For optimal performance of the touchpad, keep your fingers
and the pads clean and dry. When tapping on the pad, tap
lightly. Do not use excessive force.
TABLE NOTE:
If you swap the left and right buttons, "tapping" on the touchpad as an
alternative method of pressing the left button will no longer be valid.

Using the Touchscreen

Here are some common terms that you should know when using
the touchscreen:
Term
Click/Point Tap gently on the touchscreen.
Double-click Tap twice on the touchscreen rapidly.
Drag and drop Press lightly on the touchscreen and move your
finger until you reach your destination (drag).
Finally, release your finger (drop) when you
finish dragging your selection to the destination.
The object will drop into the new location.
Downloaded from www.Manualslib.com
ML910 Rugged Notebook - Quick Reference Guide
Action
Action
manuals search engine
Typewriter Keys
Typewriter keys are similar to the keys on a typewriter. Several
keys that are not found on the typewriter, such as the Ctrl, Alt, Esc,
and lock keys, are added for special purposes. When the lock
keys (Caps Lock, Num Lk, and Scroll Lk) are pressed, their
corresponding indicators will light up.

Numeric Keypad

A 15-key numeric keypad is embedded on the typewriter keys as shown
next:
NOTE:
1. When the numeric keypad is activated and you need to type the
English letter in the keypad area, you can turn Num Lock off or you
can press Fn and then the letter without turning Num Lock off.
2. 2. Some software may not be able to use the numeric keypad on the
computer. If so, use the numeric keypad on an external keyboard
instead.
:
Euro Symbol
On a UK keyboard, hold down the Alt Gr key and press 4 (that has
a Euro sign on it).
6