Motorola ML910 Kurzanleitung Seite 6

Bottom-Side Components
Ref Component
Configurable
Media Bay Eject
Latch
Configurable
Media Bay Lock/
Unlock Switch
Hard Disk Drive
Compartment
Ventilation
Openings
CPU Cooling Fan
Memory
Compartment
Main Battery
Pack
Compartment
Downloaded from www.Manualslib.com
ML910 Rugged Notebook - Quick Reference Guide
Description
Allows you to remove the Optical Disk Drive,
Second Battery or Second Hard Drive.
Allows you to lock the Optical Disk Drive,
Second Battery or Second Hard Drive in place
Contains the hard disk drive of your computer.
Allow for air circulation to prevent overheating
and do not cover or block the ventilation
openings.
Contains cooling fan to protect it from
overheating.
Contains the memory compartment for
expanding the memory size of your computer.
Supplies power to your computer when the
external power is not connected.
manuals search engine
Operating the ML910 Rugged Notebook
Connecting to AC Power
1. Make sure the computer is turned off.
2. Plug the DC cord of the AC adapter to the power connector on
the rear side of the computer ( ).
3. Plug the female end of the AC power cord to the AC adapter
and the male end to an electrical outlet ( ).
4. When the AC adapter is connected, the indicator on the AC
adapter lights up, indicating that power is being supplied from
the electrical outlet to the AC adapter and onto your computer.
Now, you are ready to turn on the computer.
CAUTION:
1. When you disconnect the AC adapter, disconnect from the
electrical outlet first and then from the computer. A reverse
procedure may damage the AC adapter or the computer.
2. When unplugging the connector, always hold the plug head. Never
pull on the cord.
4