Important Safety Instructions; Main Features - Fulbat FULLOAD 750 Bedienungsanleitung

IMPORTANT SAFETY INSTRUCTIONS

Please read this manual and follow the instructions carefully before using the charger
WARNING

The charger is designed to charge 6V & 12V lead-acid batteries from 2Ah to 20Ah. However,
charger can maintain batteries up to 30Ah.

We always recommend that you check the Battery Manufacturers specifications before using this
charger.

Explosive gases may escape from the battery during charging. Provide ventilation to prevent flames
and sparks.

For indoor use. Do not expose charger to rain, snow or liquids.

For charging lead-acid batteries ONLY. (of the size & voltage indicated in the specifications table)

Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.

The charger should be used on a flat surface.

Never charge a frozen battery.

Never charge a damaged battery.

Never place the charger on the battery while charging.

Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit
battery or other electrical part that may cause explosion.

When working with a lead-acid battery, remove personal metal items such as rings, bracelets,
necklaces, watches...

NEVER smoke or allow a spark or flame in vicinity of battery or engine.

Do not charge non-rechargeable batteries.

In order to reduce risk of electric shock, unplug charger from AC outlet before doing any
maintenance or cleaning. Turn off controls will reduce risk.

The kit is not supposed to be used by children or by people who are not able to understand the
manual, unless they are supervised by a responsible person who ensures the proper use of the kit.

MAIN FEATURES:

 Easy to Use: The Battery Charger is easy to operate and requires no technical experience.
 Charge & Maintain - Automatic Charge: On power up, the charger will automatically go to charging
system, then could be left unattended and never overcharge your batteries.
 Charge & Maintain - Automatic Maintenance: When the battery is charged to "full" state, the
charger automatically switches to maintain the battery. It will monitor the battery voltage and continue
to peak performance to the battery.
 Voltage Output Select Switch: Select 6V or 12V output.
 Short circuit protection: The charger will automatically turn off when the output short circuit
occurred and prevent any damage
 Reverse polarity protection : The charger can automatically shut off when the output polarity is
reversed and without damage
SAFETY & TEMPERATURE FEATURES:
 Never overcharge your battery
 Output short circuit protection
 Output overload protection: The charger employs the use of a 'Solid State Circuit Interrupter' that
Automatic Switching Mode Battery Charger & Maintainer
.
P.2