Genua S Kurzanleitung Seite 25

The optional brackets can be used to mount the S hardware in a 19" rack.
Attach the brackets with the screws already in the chassis to the S
hardware, as shown in the following two pictures. Then attach the handles
to the mounting brackets with the supplied screws. Now fasten the brackets
to the 19" rack.
When mounting additional systems to the rack a half rack unit distance
must be left above and below the S­system to ensure optimal circulation for
cooling.
Please note that due to different manufacturer requirements, the screws are
not included for mounting to the rack in scope of delivery. These are usually
delivered with the rack.
25