Herunterladen Inhalt Inhalt Diese Seite drucken

Maestro MR210 Bedienungsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
-By the end of use, first set the switch to "0", and then unplug the
device.
COOL mode (cold air)
Enabling COOL mode significantly reduces the temperature of the
air and contributes to the rapid cooling of the hair.
Press and hold the COOL button (J /Pic.1) for the cool air. If you
form the hair with a comb, start with hot air, screw and warm curl
and then turn on the COOL mode. Formation of hairstyle is more
efficiently using concentrator (F /Pic.1).
Using the concentrator
Application of the concentrator (F/Pic.1) allows you to direct the
airflow to a certain point. It is recommended to use concentrator for
the drying and shaping hairstyles with a comb or curlers.
Maintenance and care
WARNING!
- Before cleaning the appliance in any way, make sure that the
appliance plug is not connected to the socket.
- Always unplug from the plug socket and let it cool down
completely before cleaning.
- Never place it in water or any other liquid.
- Wipe the housing first with a slight wet then with soft dry cloth. Let
it dry completely.
- Regularly clean the intake grille from hair and dust with a small,
soft brush.
- Any other maintenance should be performed by qualified
personnel in the service center.
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis