Seite 1
Aufbauanleitung / assembly instructions mod. 2973 - 2975 mit Frontauszug Bitte diese Aufbauanleitung sorgfältig aufbewahren! Please keep this assembly instructions carefully! M10 x 630 M6 x 35 1.Montagematerial. 1. Fitting material. M6 x 35 2. Den Oberbau umgedreht auf gepolsterten Montageböcken ablegen.
Seite 2
3. Screw in the 4 threaded rods. Place the two table columns on the threaded rods. Put the metal plate onto the colums and fix it with 4 round nuts. 4. Den Unterbau wenden. 4. Turn the table base. 2 / 6 2973 - 2975 mit Frontauszug Änderungsdatum: 17.03.21...
Seite 3
6. Fertiger Tisch. 7. Vor dem Ausziehen auf beiden Seiten die 6. Finished table. schwarzen Bremshebel lösen. 7. Before the extension can be pulled out, the two black levers must be released. 3 / 6 2973 - 2975 mit Frontauszug Änderungsdatum: 17.03.21...
Seite 4
For this purpose do the 9. … loosen the socket screw. Adjust the same steps as under No. 9 described. extenson-rod by turning the inner socket screw. Then tighten both outer socket screws again. 4 / 6 2973 - 2975 mit Frontauszug Änderungsdatum: 17.03.21...
12c. Swing out the table-extension by using the 12c: Die Klappeinlage mit dem Ledergriff aus- leather belt. Check the hight again; if klappen, die Höhe rechts erneut kontrollie- necessary adjust again. ren und wenn nötig erneut einstellen. 5 / 6 2973 - 2975 mit Frontauszug Änderungsdatum: 17.03.21...
Höhe kontrollieren. Ggf. erneut justieren. 13c. Swing in both pieces of the table-extension at once. Use the leather-belt to swing out the table- extension and check the hight again. If necessary, adjust again. 6 / 6 2973 - 2975 mit Frontauszug Änderungsdatum: 17.03.21...