Playing Back Music Via Bluetooth; Control Buttons - Clatronic BR 835 BT Bedienungsanleitung

1. Flip open the cover (11).
2. Set the function selector (6) to the "USB" position.
3. Directly connect a USB storage medium to the respective
port. Playback then begins.
NOTE:
Always directly connect a USB storage medium to
•
the USB port to prevent any malfunctions.
• The USB port is not suitable for charging external
devices.
4. Operation:
• Skip to the next, previous title respectively with the
NEXT / PREV buttons (5/4). If you keep the buttons
pressed down, a music search will start.
• You can interrupt the replay with the PLAY/PAUSE
buttons (3). The number of the current title will flash in
the display. If you push the button again, the replay will
start in the same location.
Always keep the cover closed when not using it.
CAUTION:
Before you remove the USB memory medium, switch the
device to Radio operation.
NOTE:
• The USB operating voltage is only active in "USB mode".
• The 5V needed for USB mode cannot be guaranteed if
the batteries are not sufficiently charged. Insufficiently
charged batteries may lead to breaks in sound when
playing music from the USB in battery mode. If this is
the case, insert new batteries or operate the unit with the
mains adapter.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connection of
devices over a short distance. Devices with Bluetooth standard
are transmitting between 2.402 and 2.480 GHz in the ISM band
(Industrial, Scientific and Medical). Interference can be caused
for example by WLAN-networks, DAB radios, cordless phones,
or microwave ovens which work on the same frequency band.
This device offers you the possibility to use a Bluetooth-enabled
device. The functional radius is limited to approx. 15 metres
depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Au-
dio Distribution Profile) and has a music-player function, then
you can also wirelessly transfer music to the device. The A2DP
profile involves a multi-vendor Bluetooth profile. By streaming,
stereo-audio signals are wirelessly transferred between the
playing device (source) and the receiving device. To be able to
remotely control the source, the playback device must support
the AVRCP profile (Audio Video Remote Control Profile).
Due to the different device manufacturers, models, and soft-
ware versions, a full functionality cannot be guaranteed.
12
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Set the function selector (6) to the "BT" position. The
POWER control lamp flashes blue. This indicates that the
unit is in pairing mode.
3. Choose the Bluetooth menu in your player and register the
device in your player. For this, refer to the operation manual
of your player. The device "BR 835 BT" will show in your
player as a selection.
NOTE:
Only one playback device can be connected with the
device at one time. If the device is already connected
with another playback device, the device will not appear
in the BT selection menu.
4. Now enter the password "0000" in your player, depending
on the device manufacturers, model, and software version.
If pairing has been successfully completed, the POWER control
lamp will light up blue. For the further procedure, please refer
to the user manual of the playback unit. If possible, adjust the
volume of the external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function in
your playback device.
• The Bluetooth compatibility cannot be ensured for de-
vices (e.g. mobile phones) getting released in the future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-
saving mode. Deactivate the energy-saving mode as it
can otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to stay
activated in your player. Observe the operation manual of
your player.
• If a mobile phone on which you are playing music recei-
ves a call, the music will be interrupted. However, the
sound is not played back by the device. After you have
ended the call, the devices are connected to each other
again and playback continues.

Control buttons

NOTE:
Not all functions may be supported, depending on the player.