Use - Casselin CDLPC4 Benutzerhandbuch

In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the device
in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.

5.2 Use

WARNING
The set-up of the device installation and maintenance must be carried out by professionals only.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
START-UP
The device must be completely removed from its packaging. All protections must be completely removed.
Place the device on a solid, flat surface
Never place the device on a flammable surface.
Do not install this appliance near open fires, or other heating appliances.
USE
Plug in the device.
Once plugged in, the red LED lights up.
Turn the temperature control knob. The green light comes on.
The temperature can be between 40 ° and 80 ° C.
When the desired temperature is reached, the green light goes out.
When the temperature decreases, the appliance starts heating again and the green light comes on again.
NOTE
The device is fitted with a safety system in the event of overheating. If tripped, unplug the device and allow it
to cool. If this protection system operates regularly, it is imperative to contact your dealer.
After automatic shutdown, the device can only be put into service by pressing the Reset button on the back
of the device, wait for the temperature to drop, press the Reset button.
EN