DELTACALOR SLIM C Installation Und Anwendung Handbuch Seite 59

Power operating mode (POWER MODE)
When POWER MODE is enabled, the towel rail is controlled according to the power
levels that range from 1 (minimum power) to 10 (maximum power), and are set by the
user. The us-er can set the operating modes, with which the power levels indicated in
the table below are associated:
Operating mode
- BOOST
HIGH
MEDIUM
LOW
- SCHEDULE
- MANUAL
- DATE & TIME
- STANDBY
- BLUETOOTH
LED status
LED
Red
Orange
Green
Connection with smart device via smart Bluetooth
Download the "ELECTRIC+" App, open it and register (if necessary) or enter as a guest. This App
includes a guided installation menu and provides instructions for putting the Stone in pairing mode
(search for Smart device that can accept the connection via low energy Blue-tooth). Access the
BLUETOOTH menu and follow the indications provided by the App.
Control via the pilot wire (only for class II cable version)
Pilot wire control can only be enabled in SET-POINT control mode, and can only be used for a
Class II model. To enable the Pilot Wire control mode, make sure you have connected the black
wire, which relates to the Pilot Wire signal, to the relevant control unit correctly. Select the Com-
fort operating mode, and the Stone control will automatically enable reading of the Pilot Wire.
If it is recognised correctly, the AUTO icon will switch on at the top right of the display, and the
control will go to Lock automatically.
Description
Power level 10
Constant high power
Constant medium power
Constant low power
Daily programming
Constant temperature
regulation
Date and time setting
Mode in which the
radiator is not on
For connection to the App
SETPOINT MODE
23-30°C
19.5-22.5 °C
15-19°C
POWER MODE
7-10
3-6
1-2
[ 19 - EN ]
Default value
The 2 hour period can be set
using the App.
Power level 9 (editable using
the App)
Power level 5 (editable using
the App)
Power level 2 (editable using
the App)
Default program
This can only be used with
the App, and the value can be
set using the App.
-
-
-