Technical Specification - Velleman DPF2 Bedienungsanleitung

7. Battery
•
This photo frame contains an internal rechargeable battery. When the device is end-
of-life, this battery has to be removed.
•
To do this, remove the 4 screws [H] and the back cover.
•
Locate and cut off the battery leads and remove the battery.
•
Do not attempt to recharge non-rechargeable batteries and do not throw in fire as
they might explode.
WARNING: handle batteries with care, observe warnings on battery
casing. Dispose of batteries in accordance with local regulations.
Keep batteries away from children.

8. Technical Specification

display
memory
picture format
compatible USB
transfer speed
battery
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of
this device.
For more info concerning this product, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Components nv. All worldwide rights reserved. No
part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
17/12/2008
screen
colours
size
8Mb (up to 47 images depending on pixel size)
JPEG, GIF, BMP
USB1.1 & 2.0
800k
built-in rechargeable 3.7V Li-ion poly battery (up to 5hrs of playback)
5Vdc – 0.03A
photo frame
LCD-screen
53g
DPF2
1.5" colour LCD
64k
128x128 dpi
55 x 40mm
27 x 27mm
6
®
Components nv
©Velleman