BeeWi BBK200 Bedienungsanleitung Seite 8

8
section 1.6.)
2. On your device, open Bluetooth
Devices, and click "Add new"
3. After the keyboard is discovered, select it, and then tap "Next"
4. When a passcode is requested,
leave the field blank and tap
"Next" (if this fails, enter "0000" as
a passcode and press Next)
5. At this step select "Input device"
service and tap "Finish".
6. Go to the Software Settings
panel, and tap "Connect" (see
2.1.4.).
2.2.3. Input Driver
To open the input driver, go in "system" in the
Settings menu and click on "Bluetooth Input
Driver".
ENGLISH