Beper P201UTP011 Bedienungsanleitung Seite 8

EN
Warnings
This device does not contain nor comes with disinfectant solution;
for a more efficient disinfectant action, use water­based solutions
with alcohol content equal to or above 75%.
This device is equipped with an atomizer that nebulizes solution
particles, to disinfect hands and/or objects; do not use oily solutions
(e.g. gel, fragrance oils, etc.) to avoid the atomizer to get clogged.
Make sure that children do not play with the device, to avoid dama­
ge to their health and to device as well.
Do not use this device in the proximity of flames and/or flammable
fluids.
This device is equipped with a rechargeable, non­removable lithium
battery; do not throw the device in open flames and/or ordinary wa­
ste, dispose it in the dedicated containers, according to the rules
applicable in the place of use.
Do not expose this device to extreme temperatures.
Warning: do not immerse the device in water or other li-
quids, there is a risk of fire or spontaneous combustion.
High intensity ambient light can affect the correct operation of in­
frared sensor.
Description of product Fig.A
1. ON/OFF Switch
2. USB cable inlet
3. Infrared sensor
4. Atomizer
5. Tank
6. Bottom shell
7. USB cable
8. Cotton filter
Charging
Before first use, it is advisable to fully charge the battery.
Insert the USB cable into the inlet found on the main unit of the de­
vice, and connect it to a power supply (e.g. power bank, laptop), or
to a wall plug through a USB adapter (not provided with the device).
The red LED indicator flashes during charging, and becomes stea­
dy when the charging is complete.
Once charging is over, disconnect the USB cable from the power
supply or the wall plug, and remove it from the device.
8